Hydraulic unboxing crusher
Dear Senegal [Hydraulic unboxing crusher] customer, it is very lucky that you can find us in the vast information! Self-confidence and self-improvement, integrity and innovation, vigorous and vigorous, and move forward bravely Maoxin Machinery is a Chinese Hydraulic unboxing crusher product supplier. Since its establishment, Do a good job in energy conservation and emission reduction actions, and consolidate the foundation of green life has been deeply involved in the Lithium battery and circuit board recycling field and has provide high standard Hydraulic unboxing crusher products for Lithium battery and circuit board recycling customers! The following is the relevant information of Hydraulic unboxing crusher product organized by Maoxin Machinery for you. Maoxin are willing to provide you with new Hydraulic unboxing crusher information to help you make a correct choice!
Introduction
The hydraulic unboxing crusher is an improved sand making machine based on the convenience of user maintenance in the later stage. The hydraulic one click unboxing maintenance is convenient, time-saving and labor-saving. The fine crushing hydraulic unboxing crusher and sand production line are coarse crushing equipment used for crushing hard materials such as ores. It has the characteristics of high crushing rate, high yield, average particle size, simple structure, easy maintenance, and low production cost. When the sand production line is in operation, the movable jaws come into direct contact with the material, so the load is usually very high. Providing insurance to ensure this supply will greatly increase the proactive control of all sand making equipment and production lines.
Advantage
1. One click opening and closing the back cover, the entire process only takes 5 minutes, saving about 3-4 hours of opening and closing the back cover time compared to traditional equipment, saving time and labor;
2. Fear of blockage, after 5 minutes of opening the lid, directly handle the blockage, and the entire process only takes 10 minutes.
Operational principle
When the hydraulic unboxing sand making machine is in operation, driven by the electric motor, the rotor rotates at high speed. When the material enters the plate hammer action area, it collides and breaks with the plate hammer on the rotor, and is then thrown towards the counterattack device to break again. Then, it bounces back from the counterattack lining plate to the plate hammer action area and breaks again. This process is repeated, with the material entering from large to small, and the counterattack chamber repeatedly crushing until the material is crushed to the required particle size, Discharged from the discharge port.
Technical parameter
| Model | Feed opening（mm） | Feed（mm） | Discharge size （mm） | Adjusting the width of the discharge gap（mm） | Production（t/h） | Power （kw） | ||
| Cement clinker | Limestone | Glass sand | ||||||
| 800×400 | 400×230 | 120 | ≤5 | 5-20 | 20-30 | 30-45 | 35-45 | 22-37 |
| 800×600 | 600×230 | 180 | ≤5 | 5-20 | 35-40 | 40-55 | 45-55 | 37-45 |
| 800×800 | 800×230 | 180 | ≤5 | 5-20 | 35-45 | 60-65 | 55-65 | 45-55 |
| 1010×1010 | 1000×330 | 180 | ≤5 | 5-20 | 45-55 | 60-75 | 65-75 | 55-75 |
| 1200×1000 | 1200×330 | 180 | ≤5 | 5-20 | 80-110 | 80-100 | 80-100 | 90-110 |
| 1200×1200 | 1200×420 | 180 | ≤5 | 5-20 | 100-110 | 90-100 | 90-120 | 110-132 |
| 1400×1400 | 1400×420 | 190 | ≤5 | 5-20 | 100-150 | 100-150 | 120-150 | 160 |
| 1600×1600 | 1600×520 | 190 | ≤5 | 5-20 | 170-210 | 190-250 | 190-250 | 250 |
| 1800×1800 | 1800×520 | 190 | ≤5 | 5-20 | 250-270 | 280-310 | 280-310 | 315 |